Product Description
Construction water oil nature gas pipeline Seismic bracing accessories pedestal fixing connection coupling
with Ductile iron/laser cutting hydraulic forging
Product Description
Pipeline support system are widely used for Various types of pipeline support of Hotels, office buildings, residential buildings, Bridges and other construction projects,It has the function of quakeproof, Reduce vibration and buffering for the pipeline.
Pipe support accessories produced by our factory,It is made of carbon steel, ductile iron, stainless steel by casting or forging.According for the Different requirements of the customers,providing support set of Corresponding model.
Pipe supporting system consist of Base, support rod, pipe clamp.Different pipe construction engineering use Different pipeline supports set(Base, support rod, pipe clamp match each other),Specific pipe support system shall be provided by the customer construction drawings,Our engineers will follow the construction drawings,Making the corresponding pipeline support quotation.
Product feature
1.Our products pass UL,FM industry certification standards.
2.According to the engineering drawings provided by the customer, our engineers will customize the special pipe support system accessories for the customer
3.Pipe support accessories produced by our factory,it is made of carbon steel,ductile iron,stainless steel by casting or forging.
4.Our products are galvanized, anti-corrosion, beautiful and smooth, long service life.
Product show
Application field
Case show
Company Profile
Utterly is a high-tech private enterprise integrating product design, research and development, production, sales and installation.The company has absorbed the advanced concepts of similar products at home and abroad, combined with the characteristics of domestic mechanical and electrical engineering equipment installation, introduced advanced manufacturing and testing equipment, and creatively launched the “construction mechanical and electrical equipment anti-seismic support crane rack system and prefabricated support system” product with more than a dozen patents and new independent intellectual property rights.
Adhering to the business philosophy of “innovation wins sustainable development, and technology creates a safe world”,Utterly Intelligent Technology Co.,Ltd. is based on the domestic market, and goes to the world.
The company’s products are the first to pass the strict US UL certification, FM certification,EU CE certification and national inspection agency testing.Utterly currently provide the following products/Service to our CHINAMFG customers,especially FM/UL Seismic Sway Bracing:
1. Utterly Products:
Seismic Sway Bracing.Structural Attachment, Quick Bracing Clamp,Pipe Clamp,Beam Adapter
Swivel Hanger, Clevis Hanger, Beam Clamp
Other Customized Products
2. One-Stop Procurement Service
The company has a professional team in product design, mold making, process innovation, product sales, etc., and has established a complete system from CAD, 3D, BIM design to product production and testing, providing customers with professional pre-sale, in-sale and after-sale services, etc. System-wide technical advice and services.
3. OEM/ODM Service
The products are exported to Europe, America, South America, the Middle East, Southeast Asia and other countries.The quality has been well received by customers.
This is general company info. For the latest and most complete products, news, updates and additional information, please contact us. We invite you to work and grow together.
| Product Name | Seismic support system accessories |
| Seismic parts | Base/Connecting support frame/pipe clamp |
| Craftsmanship | Casting, laser forging |
| Product material | Carbon steel, ductile iron, stainless steel |
| Approval Standards | FM,UL Certificate |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Temperature and Environmental Limits for Various Beam Coupling Materials
The temperature and environmental limits of beam coupling materials depend on their specific composition and properties. Different materials have varying degrees of resistance to temperature extremes, chemicals, humidity, and other environmental factors. Here are some common beam coupling materials and their associated temperature and environmental limits:
- 1. Stainless Steel:
Stainless steel beam couplings are known for their excellent mechanical properties and resistance to corrosion. They can typically operate within a wide temperature range, from -40°C to 300°C (-40°F to 572°F). Stainless steel is also resistant to most chemicals, making it suitable for various environments, including industrial and outdoor applications.
- 2. Aluminum:
Aluminum beam couplings offer lightweight construction and moderate mechanical properties. They have a more limited temperature range compared to stainless steel, typically operating between -20°C to 120°C (-4°F to 248°F). While aluminum has good corrosion resistance in certain environments, it is not as durable as stainless steel in harsh conditions.
- 3. Brass:
Brass beam couplings have reasonable mechanical properties and corrosion resistance. They are suitable for applications with temperatures ranging from -20°C to 100°C (-4°F to 212°F). Brass is more susceptible to corrosion in certain environments, so it is essential to consider the specific application’s conditions.
- 4. Plastic/Polymer:
Beam couplings made from plastic or polymer materials offer lightweight and cost-effective solutions. However, their temperature limits are more restricted compared to metal couplings. They typically operate between -30°C to 80°C (-22°F to 176°F). These couplings may not be suitable for high-temperature or chemically aggressive environments.
- 5. Carbon Steel:
Carbon steel beam couplings are known for their strength and mechanical properties. They generally operate between -40°C to 120°C (-40°F to 248°F). Carbon steel is vulnerable to corrosion, so it may not be ideal for applications in corrosive or humid environments without proper protection.
It’s crucial to consider the temperature and environmental conditions of your specific application when selecting a beam coupling material. Choosing a material that can withstand the intended operating conditions will ensure the longevity and reliable performance of the coupling.
Additionally, keep in mind that various beam coupling manufacturers may offer specific variations of materials with different properties and limits. Always refer to the manufacturer’s datasheets and technical documentation for precise information on the temperature and environmental limits of their beam coupling products.
Safety Considerations for Installing or Using Beam Couplings in Industrial Setups
When installing or using beam couplings in industrial setups, several safety considerations should be taken into account to ensure the safe and reliable operation of the motion control systems. Here are some important safety considerations:
- Proper Installation:
Ensure that beam couplings are correctly installed according to the manufacturer’s instructions. Follow the recommended torque values for tightening set screws or clamps to avoid over-tightening or under-tightening, which could lead to coupling failure or excessive wear.
- Shaft Alignment:
Accurate shaft alignment is crucial to prevent unnecessary stress on the coupling and connected components. Misalignment can lead to premature wear, vibrations, and reduced system performance. Utilize alignment tools and techniques to achieve precise shaft alignment within the coupling’s specified tolerances.
- Overloading:
Avoid exceeding the beam coupling’s rated torque capacity or maximum axial load. Overloading the coupling can lead to deformation, coupling failure, or damage to connected equipment. Ensure that the coupling is appropriately sized for the application’s torque requirements.
- Regular Inspection:
Perform routine inspections of beam couplings to check for signs of wear, damage, or misalignment. Address any issues promptly and replace worn or damaged couplings to prevent unexpected failures.
- Environmental Conditions:
Consider the operating environment when selecting beam couplings. Different materials offer varying levels of resistance to corrosion, temperature extremes, and other environmental factors. Choose a material that can withstand the specific conditions of the industrial setup.
- Protective Enclosures:
If the beam couplings are exposed to moving parts or hazardous equipment, consider using protective enclosures or guards to prevent accidental contact and ensure operator safety.
- Regular Maintenance:
Follow a regular maintenance schedule for the entire motion control system, including beam couplings. Lubricate moving parts as recommended by the manufacturer and replace worn components to maintain reliable operation.
- Training and Awareness:
Ensure that personnel involved in the installation, operation, and maintenance of the motion control system are properly trained and aware of safety procedures. Emphasize the importance of following safety guidelines to prevent accidents and injuries.
By taking these safety considerations into account, industrial setups can enhance the safety and efficiency of their motion control systems. Regular maintenance, proper installation, and adherence to safety guidelines are essential to ensuring the longevity and reliable performance of beam couplings and the overall safety of the workplace.
Selecting the Appropriate Beam Coupling for Your Motion Control Needs
Choosing the right beam coupling for your specific motion control needs involves considering several factors to ensure optimal performance and reliability. Here’s a step-by-step guide to help you make an informed decision:
- Identify Application Requirements:
Start by understanding the specific requirements of your motion control application. Consider factors such as the type and amount of misalignment, torque capacity, shaft sizes, operating environment, speed, and precision requirements.
- Types of Beam Couplings:
Familiarize yourself with the different types of beam couplings available, such as single-beam, multi-beam, bellows, servo disc, slit, step beam, and jaw couplings with beam elements. Each type has unique characteristics that cater to different motion control needs.
- Misalignment Compensation:
Assess the level of misalignment in your application. If you require compensation for angular, axial, and parallel misalignment, multi-beam or bellows couplings might be suitable. For primarily angular misalignment, a single-beam coupling could be sufficient.
- Torsional Rigidity:
Consider the required torsional rigidity for precise motion control. Servo disc couplings offer high torsional rigidity and low backlash, making them ideal for precision applications, while slit couplings provide more torsional flexibility and vibration dampening.
- Environmental Factors:
Take into account the operating environment, including temperature, humidity, and exposure to chemicals. Choose a beam coupling with materials that can withstand the environmental conditions of your application.
- Speed and Torque Capacity:
Evaluate the speed and torque requirements of your motion control system. Ensure that the selected coupling can handle the specified torque while maintaining the desired speed without compromising performance.
- Space Constraints:
If your application has limited space, consider compact designs like single-beam or slit couplings. These types can efficiently fit into tight spaces while providing the necessary misalignment compensation.
- Backlash and Precision:
For applications that demand minimal backlash and high precision, servo disc couplings are a suitable choice due to their exceptional torsional rigidity and accurate torque transmission.
- Vibration Dampening:
If your system requires vibration dampening to protect sensitive components or improve overall performance, consider beam couplings with features like slits or bellows.
- Customization Options:
Check if the coupling supplier offers customization options. Some manufacturers can tailor the beam coupling to meet specific application requirements, providing an optimal solution for your motion control needs.
- Consult with Experts:
If you are uncertain about the best beam coupling choice for your application, consult with motion control experts or the coupling manufacturer’s technical support team. They can offer valuable insights and recommendations based on your specific needs.
By carefully evaluating these factors and considering the advantages and limitations of each beam coupling type, you can select the most appropriate coupling for your motion control needs. Making the right choice will contribute to the efficiency, reliability, and longevity of your motion control system.
editor by CX 2024-05-08