Consisting of the strain balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this power unit is intended to operate materials dealing with equipment. The decreasing movement is achived from the solenoid valve with all the lowering pace controlled by an adjustable needle valve. The left and proper functions are outfitted that has a dual pilot operated check out valve and cross-over relief valves.
Remark: Please seek advice from our income engineer for that various pump displacement, motor electrical power or tank capacity.
1. This energy unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
two. Clean all the hydraulic components concerned prior to set up of the energy unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst, which really should also be clean and free of impurities.N46 hydraulic oil is advised.
4. This power unit really should be mounted horizontal.
five. Check the oil degree during the tank after the primary start off with the power unit.
six. Oil modifying is needed just after the original a hundred operation hours, afterwards when each and every 3000 hours.