Materials Handling Electrical power UNIT 2
This power unit characteristics electrical power up gravity down circuit. Activate the start off solenoid to start the motor to lift the machine. The lowing motion is activated by the solenoid valve together with the lowering speed controlled by the stress compensated movement control valve. Products of this series may be broadly utilized in the business of logistic devices for instance fork lift, mini lift table, and so forth.
1. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean the many hydraulic elements concerned in advance of mounting the energy unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst,which ought to also be clean and absolutely free of impurities, N46 hydraulic oil is encouraged .
four. Oil shifting is needed immediately after the initial a hundred operation hours,afterwards as soon as just about every 3000 hrs.
5. The electrical power unit really should be mounted horizontally.
Materials Handling Electrical power UNIT one
This energy unit is designed for your fork lift sector, consisting of highly effective gear pump, DC motor, manual increase and decrease valve, tank, ect. The up and down movement are managed through the lever with the manual release valve, which is equipped with an electric switch to activate the motor. The lowing pace is controlled from the stress compensated movement management valve.
1. The duty of this energy unit is S3, i.e. 30 seconds on and 270 senconds off.
two. Clean all of the hydraulic elements concerned before installation of the energy unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst, which ought to also be clean and free of impurities, N46 hydraulic oil is recommended .
4. Oil changing is needed immediately after the original one hundred operation hours, afterwards after every 3000 hours.
5. The electrical power unit shown is designed to be mounted horizontally.