Fluid couplings
Capabilities:
Improve the starting up capability of electric motor, shield motor towards overloading, damp shock, load
fluctuation and torsional vibration, and balance and load distribution in situation of multi motor drives.
Applications:
Belt conveyers, csraper conveyers, and conveyers of all sorts Bucket elevators, ball mills, hoisters, crushers,
excavators, mixers, straighteners, cranes, etc.
Variety:
Without the need of special demands the following technical information sheet and electrical power chart are made use of to select the correct size of
fluid coupling with oil medium according for the electrical power transmitted along with the speed of motor, e, i, the input from the fluid coupling.
When ordering, please specify the dimensions from the shaft ends of motor and driven machine(or reducer)such as
diameter, tolerance or fit of your shafts (if no tolerance or match is specified, the bores will be machined the H7),match length of your
shafts, width and depth of your keys (of notice the regular No. enforced).For ordering the fluid couplings with belt pulley, brake
pulley or the unique necessities please state the technical information in detail.
YOXz is usually a coincidence machine with moving wheel which can be within the output point on the coincidence machine
and is connected with elastic axle connecting machine (plum blossom variety elastic axle connecting machine or
elastic pillar axle-connecting machine and even the axle-connecting machine designated by customers). Typically
there are actually three connection varieties.
YOXz is inner wheel driver which has tight construction plus the smallest axle size. The fittings of YOXz possess a wide
utilization, simple construction and the size of it has generally be unified within the trade. The connection kind of YOXz is the fact that
the axle dimension of it can be longer nevertheless it is needless to move the electromotive machine and decelerating machine. Only
demolish the weak pillar and connected spiral bolt can unload the coincidence machine so it really is severe practical.
Purchaser should provide the dimension of electromotive machine axle (d1 L1) and decelerating machine axle (d2 L2). The
wheel dimension (Dz Lz C) inside the table is only for reference, the real size is made a decision by consumers.